Single Board Computers, PC/104
( PC104 ), PC/104-Plus,
SUMIT & STD Bus Products

Thursday, May 17, 2012

About Us | Contact Us | News | Careers | Support
   

PCM-DC-AT512
+5V and +/-12V DC/DC PC/104 Power Supply

 
SPECIFICATIONS
    Power Supply Module
  • PC/104 triple output DC/DC power supply
    Input Voltage
  • Wide range: 10-50 VDC
    Output Voltage
  • 3 Output Ranges available:
    • +5V @ 20A
    • +12V @ 3A
    • -12V @ .5A
  • Over current protection (OCP) and over voltage protection (OVP) for all outputs
    Bus Expansion
  • PC/104
    Industrial Operating Temperature Range
  • -40°C to 85°C
    Mechanical
  • PC/104-compliant
  • Dimensions: 3.6 x 3.8 inches (90 x 96 mm)
  • Weight: 4 oz (114g)
    Additional Specifications
  • LED provides visual status of power
  • High efficiency
  • Fast transient response
  • Low voltage ripple
  • No minimum load required for regulation
  • No fan or heat sink required
  • RoHS compliant
  • Custom OEM configurations available
  • Two connectors for disk driver/accessory power
 

OVERVIEW

WinSystems' PCM-DC-AT512 is a triple output, DC/DC power supply that can mount anywhere in a PC/104 stack. It features a very wide voltage input range input from 10 to 50 volts DC. This allows the unit to operate with 12, 24, or 48 volt battery operated or distributed DC power systems. It opens up a wide array of applications including transportation, MIL/COTS, security, solar-powered, and telecommunications.



ORDERING INFORMATION
Product Model
Part Number Description
PCM-DC-AT512
Triple output +5V and +/-12V PC/104 DC/DC power supply
ISM-DC-AT512
Triple output +5V and +/-12V DC/DC power supply without PC/104
Cables (valid for all Product Models unless otherwise stated)
Part Number Description
Power ATX and Reset, .1 Molex, 14-in. Unterminated
 
DOWNLOADS
PDF Datasheet
Printable datasheet in PDF format Datasheet
Manual
Electronic product manual in PDF format Manual
Mechanical Drawing
PDF Version PCMDCAT512_Mechanical.PDF
SolidWorks (created in version 2012) PCMDCAT512_SolidWorks.zip
Step PCMDCAT512_Step.zip
IGS PCMDCAT512_IGS.zip

WinSystems reserves the right to make changes to products and/or documentation without further notification. Product names of other companies may be trademarks of their respective companies.

Test Plug-in Boxes
 More Navigation Links



 Recent News
WinSystems Events


©2011-2012 WinSystems, Inc., All Rights Reserved    |  Policies  |  Warranty  |  Partners  |  Sitemap