PCM-DSPIO - PC/104 Dual Serial/Printer Module

Warning! QuickMenu may have been blocked by IE-SP2's active content option. This browser feature blocks JavaScript from running locally on your computer.

This warning will not display once the menu is on-line. To enable the menu locally, click the yellow bar above, and select "Allow Blocked Content".

To permanently enable active content locally...

1: Select 'Tools' --> 'Internet Options' from the IE menu.
2: Click the 'Advanced' tab.
3: Check the 2nd option under 'Security' in the tree (Allow active content to run in files on my computer.)

Single Board Computers, PC/104
( PC104 ), PC/104-Plus,
SUMIT & STD Bus Products

Thursday, September 02, 2010

About Us | Contact Us | News | Careers | Support

PCM-DSPIO
PC/104 Dual Serial/Printer I/O Module

SPECIFICATIONS

COM Channels

One 2-channel UARTs (16C552)
Aynchronous protocol support

FIFO Buffer

16-byte transmit and receive FIFO

Serial Port

RS-232 port types available for channels

Line Printer Port

EPP/ECP supported

Modem Interface Control

Standard Modem Interface supported

Data Transmit Rate

Up to 1.5 Mbps

Power

+5V required, 90 mA (RS-232 mode), 120 mA (RS-422 mode) typical

Industrial Operating Temperature Range

-40°C to 85°C

Form Factor

PC/104-compliant
3.60" x 3.80" (90 mm x 96 mm)

Datasheet | Manual | Software

Additional Specifications

Software Programmable Baud Rate Generator
Jumper Selectable Address and Interrupt Support
Parallel Printer Interface Support

OVERVIEW

The PCM-DSPIO dual serial and printer interface adds two PC-compatible COM ports and one parallel printer port to a PC/104 expandable system. Both serial channels support RS-232. As an option, RS-422/485 plus the Society of Automotive Engineers (SAE) J1708 interface levels are also supported. Because of its compatibility with the standard PC serial and parallel ports, the PCM-DSPIO is supported by operating systems, drivers, utilities and 3rd party libraries.

WinSystems reserves the right to make changes to products and/or documentation without further notification. Product names of other companies may be trademarks of their respective companies.

ORDERING INFORMATION

Product Model
Part Number	Description
PCM-DSPIO-8	Dual Serial and Parallel, 8-bit PC/104 interface module
PCM-DSPIO-16	Dual Serial and Parallel, 16-bit PC/104 interface module

Cables (valid for all Product Models unless otherwise stated)
Part Number	Description
CBL-101-3	26-pin ribbon to 25-pin male D connector adapter
CBL-173-1	20-pin ribbon to two 9-pin male D connector adapter