PCM-NE2000-BNC - PC/104 Ethernet Controller

Warning! QuickMenu may have been blocked by IE-SP2's active content option. This browser feature blocks JavaScript from running locally on your computer.

This warning will not display once the menu is on-line. To enable the menu locally, click the yellow bar above, and select "Allow Blocked Content".

To permanently enable active content locally...

1: Select 'Tools' --> 'Internet Options' from the IE menu.
2: Click the 'Advanced' tab.
3: Check the 2nd option under 'Security' in the tree (Allow active content to run in files on my computer.)

Single Board Computers, PC/104
( PC104 ), PC/104-Plus,
SUMIT & STD Bus Products

Thursday, September 02, 2010

About Us | Contact Us | News | Careers | Support

PCM-NE2000-BNC
PC/104 Ethernet Controller

SPECIFICATIONS

Ethernet Controller

One 10 Mbps (8390-compatible) controller
BNC connector interface available

MAC

Flow Control

IEEE 802.3-compliant support for applications

Power

+5V required, 100 mA typical

Industrial Operating Temperature Range

-40°C to 85°C

Form Factor

PC/104-compliant
3.60" x 3.80" (90 mm x 96 mm)

Datasheet | Manual | Software

Additional Specifications

Jumper selectable support
EEPROM configuration supported
Activity Status LEDs
Shared Memory support

OVERVIEW

The PCM-NE2000-BNC module is a NE2000 compatible local area network adapter board designed for PC/104 expandable systems. As a result, most network operating systems, drivers and utilities for using Ethernet in a PC-compatible environment can be used without modification.

It conforms to the IEEE 802.3 and Ethernet standards for a 10Mbps Carrier Sense Multiple Access/Collision Detection (CSMA/CD) local area network. The PCM-NE2000-BNC module provides connectivity for both an AUI and 10Base-T twisted-pair on a single board. The PCM-NE2000-8-BNC and PCM-NE2000-16-BNC support 10Base2.

WinSystems reserves the right to make changes to products and/or documentation without further notification. Product names of other companies may be trademarks of their respective companies.

ORDERING INFORMATION

Product Model
Part Number	Description
PCM-NE2000-8-BNC	8-bit, 10Base2 Ethernet LAN module
PCM-NE2000-16-BNC	16-bit, 10Base2 Ethernet LAN module
PCM-NE2000-8	8-bit, Ethernet LAN module
PCM-NE2000-16	16-bit, Ethernet LAN module

Cables (valid for all Product Models unless otherwise stated)
Part Number	Description
CBL-147-1	16-pin ribbon to 15-pin D-Sub AUI adapter Cable

DOWNLOADS

PDF Datasheet
Printable datasheet in PDF format	Datasheet

Manual
Electronic product manual in PDF format	Manual

Software Drivers & Examples
Ethernet Driver
Drivers for NE2000 Ethernet Controller	ne2000.zip
Windows 2000 INF file (Use with Windows XP)	netnovel.zip

Test Plug-in Boxes

More Navigation Links

Product Models

Software Development Kits

Board Sizes

Industrial Compact Flash

Recent News

(click on a topic for more)
Low cost PC/104 analog cards

New 6.5-inch open frame panel PC

Bob Burckle on Small Form Factor Computing

What is SUMIT?

SUMIT MiniPCIe wireless card

High-speed, dual channel, industrial CF