PCM-SDIO - PC/104 Quad Serial and 48-line Digital I/O

SPECIFICATIONS

Serial I/O

4 serial ports with 16C554-compatible UART core
16 byte Tx and Rx FIFOs
CTS, RTS, DSR, DTR, RI and DCD
RS-232/422/485 signal levels
Programmable data rates up to 115.2 kbps

Digital I/O

48 Bidirectional lines with Input, Output or Output with Readback (WS16C48)
Interface with signals up to 30V
12 mA Sink Current
24 of 48 DIO lines support change-of-state event sense with selectable edge polarity
Jumper selectable board I/O addresses

Bus Expansion

PC/104

Mechanical

PC/104-compliant
Dimensions: 3.60" x 3.80" (90 mm x 96 mm)
Weight: 3.2 oz (90.7g)

Additional Specifications

Combines PCM-COM4A and PCM-UIO48-B
RoHS compliant

Datasheet | Manual

Power

+5V required, 250 mA typical
MTBF: 925 years

Industrial Operating Temperature Range

-40°C to 85°C

OVERVIEW

WinSystems' PCM-SDIO combines both four serial and 48 digital I/O lines onto a single PC/104 module. This can eliminate one board in a stack without sacrificing any features or benefits. The digital portion is further enhanced since its I/O can interface wtih up to 30 volt signals.

The controller is based upon a FPGA wtih both 16C554 UART and WS16C48-compatible cores. It supports various programmable input/output and interrupt configurations.

ORDERING INFORMATION

Product Model
Part Number	Description
PCM-SDIO-144	Four serial channel and 48-line digital I/O card PC/104 interface

Cables (valid for all Product Models unless otherwise stated)
Part Number	Description
CBL-115-4	4-ft., Opto rack interface
CBL-129-1	6-in., 50-pin to 50-pin 0.10-in. ribbon cable
CBL-129-4	4 ft., ribbon cable, 50 pin. Both ends with 50-pin socket termination
CBL-173-G-1-1.0	20-pin ribbon to two 9-pin male D connector adapter
CBL-208-5	13-in., 50-pin to 50-pin 0.10-in. ribbon cable

DOWNLOADS

PDF Datasheet
Printable datasheet in PDF format	Datasheet

Manual
Electronic product manual in PDF format	Manual

Mechanical Drawing
PDF Version	PCMSDIO_Mechanical.PDF
SolidWorks (created in version 2012)	PCMSDIO_SolidWorks.zip
Step	PCMSDIO_Step.zip
IGS	PCMSDIO_IGS.zip

Software Drivers & Examples
Applicable Drivers
Application Note: Using Serial I/O with Shared Interrupt under Linux 2.6 kernel	UsingMultiportSerialCardsLinux_2_6_x.pdf
DOS Example C Functions	uio48a.zip
Linux Drivers - Kernel 2.2, 2.4	linux_uio48_96.zip
Linux Drivers - Kernel 2.6.10-17	uio48io_kernel_2.6.10.zip
Linux Drivers - Kernel 2.6.18+ - WS16C48 Digital I/O	uio48io_kernel_2.6.18.zip
Linux Drivers - Kernel 2.6.36	uio48io_kernel_2.6.36.zip
Simple C Routine using receive interrupt	8250inta.zip
Windows NT/2000/XP Registry changes for using shared interrupts with PCM-COM4A and PCM-COM8	pcom8ex.pdf
Windows XP - WS16C48 Digital I/O	wsuio48_96xp.zip

WinSystems reserves the right to make changes to products and/or documentation without further notification. Product names of other companies may be trademarks of their respective companies.